Radiation-induced non-cancer risks in interventional cardiology: Optimisation of procedures and staff and patient dose reduction

Concerns about ionizing radiation during interventional cardiology have been increased in recent years as a result of rapid growth in interventional procedure volumes and the high radiation doses associated with some procedures. Non-cancer radiation risks to cardiologists and medical staff in terms of radiation-induced cataracts, and skin injuries for patients appear clear potential consequences of interventional cardiology procedures, while radiation-induced potential risk of developing cardiovascular effects remain less clear. This paper provides an overview of the evidence-based reviews of concerns about non-cancer risks of radiation exposure in interventional cardiology. Strategies commonly undertaken to reduce radiation doses to both medical staff and patients during interventional cardiology procedures are discussed; optimisation of interventional cardiology procedures is highlighted

Open innovation and social media use towards informatics reporting: a systematic literature review

In the realm of technology development, open innovation paradigm and social media have both acquired massive attention in extensive researches since past several years. Social media, as the key medium has abundant to offer to support open innovation, thus successful innovation is the key to business rapid growth. This research provides a systematic literature review to identify, classify and summarize the factors of open innovation and social media use towards informatics reporting. Informatics reporting through this dynamic channel have been realized by many organizations nowadays, nonetheless greater number still confine with the traditional reports and are not ready to have linkage with social media platforms. Social media has been absolutely recognized as a powerful communication resource to engage stakeholders in virtual community. Hence, the result from the review suggests that there were six factors impacted open innovation and social media use towards informatics reporting, with transparency being the dominant factor. Eventually, these findings may ease the process of developing a model for open innovation paradigm implementing online platforms in organizations informatics reporting. All in all, this research shall assist organizations to plan and strategize the implementation of open innovation in social media platform for the advantage of their succeeding triumph

Improvising Intrusion Detection for Malware Activities on Dual-Stack Network Environment

Malware is software which was invented and meant for doing harms on computers. Malware is becoming a significant threat in computer network nowadays. Malware attack is not just only involving financial lost but it can also cause fatal errors which may cost lives in some cases. As new Internet Protocol version 6 (IPv6)emerged, many people believe this protocol could solve most malware propagation issues due to its broader addressing scheme. As IPv6 is still new compares to native IPv4, some transition mechanisms have been introduced to promote smoother migration. Unfortunately, these transition mechanisms allow some malwares to propagate its attack from IPv4 to IPv6 network environment. In this paper, a proof of concept shall be presented in order to show that some existing IPv4 malware detection technique need to be improvised in order to detect malware attack in dual-stack network more efficiently. A testbed of dual-stack network environment has been deployed and some genuine malware have been released to observe their behaviors. The results between these different scenarios will be analyzed and discussed further in term of their behaviors and propagation methods. The results show that malware behave differently on IPv6 from the IPv4 network protocol on the dual-stack network environment. A new detection technique is called for in order to cater this problem in the near future

Hubungan Amalan Pergudangan Dengan Prestasi Organisasi Pergudangan : Pengenalan Kepada Kerangka Konsep

Pengurus pergudangan meletakkan harapan besar ke atas amalan-amalan yang diamalkan supaya ia dapat menghasilkan prestasi organisasi yang membanggakan. Kajian mengenai amalan pergudangan dan hubungannya dengan prestasi organisasi kurang diberikan tumpuan padahal permintaan ke atas sektor pergudangan adalah kedua tertinggi selepas pengangkutan dalam industri 3PLs. Oleh itu, kerangka konsep yang diperkenalkan ini sedikit sebanyak dapat membantu memperbanyakkan kajian dalam sektor pergudangan.Dengan menjadikan teori RBV sebagai asas untuk kepada pembangunan kerangka konsep mengenai hubungan amalan pergudangan dengan prestasi organisasi pergudangan amat bertepatan sekali kerana teori tersebut menyokong konsep hubungan sumber-sumber organisasi dengan prestasi. Sumber-sumber organisasi seperti sumber manusia, teknologi maklumat, material pengendalian dan jaringan telah dicadangkan dalam kerangka konsep untuk diuji bagi melihat hubungannya dengan prestasi organisasi. Kerangka konsep ini amat sesuai untuk diuji ke atas syarikat yang menjadikan perkhidmatan pergudangan sebagai teras perniagaan mereka.disebabkan survival perniagaan syarikat ini amat bergantung kepada amalan dan prestasi

A study of printed La₂O₃ on carbon-glass substrate for micro-flexographic printing process using angle resolve x-ray photoelectron spectroscopy (AEXPS) analysis

Micro-flexographic printing process involved in patterning technique from micron to nano scale range to be used for graphic, electronic and bio-medical device on variable substrates. Adhesive property of printing process could be described as an interchangeably with some ink or medium and substrate which was applied to one surface of two separate items that bonded together. Lanthanum oxide (La2O3) had been used as a rare earth metal candidate as printing ink medium. This metal deposit was printed on carbon-glass substrate. The choose of Lanthanum Oxide as a target is due to its wide application in producing electronic devices such as thin film battery and printed circuit board. The La2O3 deposited on the surface of carbon-glass substrate was then analyzed using Angle Resolve X-Ray Photoelectron Spectroscopy (ARXPS). The position for each synthetic component in the narrow scan of Lanthanum (La) 3d and O 1s are referred to the electron binding energy (eV). This research was focused on 3 narrow scan regions which are C 1s, O 1s and La 3d. Further discussion of the spectrum evaluation was discussed in detail. Here, it was proposed that from the adhesive properties of La was suitable as an alternative medium for micro-flexographic printing technique in printing multiple fine solid lines image at micro to nano scale feature. Hence, this paper will describe the capability of this particular metal as rare earth metal in a practice of micro-flexographic printing process

A study of printing plate mould development by using 3d printers for micro-flexographic printing process

Micro-flexographic is a new printing technique that has been implemented by combining flexographic printing and micro-contact printing technique. Flexographic printing is generally a high-speed production in roll to roll printing technique widely used in the graphic printing industry. Micro-contact printing technique is usually employed to produce fine solid line structures in micro to nano scale. Mould preparation for printing plate is also one of the vital parameters in micro to nano scale image printing. A precise mould could be used to produce the most accurate printing plate for micro-flexographic printing. The three dimension (3D) printer has the capability of producing fine solid lines below 100 μm in width and gap on master mould for the printing industry. This research elaborated the use of various 3D printers to produce a master mould for micro-flexographic printing. This paper investigated the capability of multiple 3D printers in creating micro to nano fine solid lines in the master mould for future development and application of printing in the electronic, graphic and bio-medical field

Factors affecting endoglucanase production by Trichoderma reesei RUT C-30 from solid state fermentation of oil palm empty fruit bunches using Plackett-Burman design

A study was conducted to screen parameters affecting the production of endoglucanase by Trichoderma reesei RUT C-30 on solid state fermentation of oil palm empty fruit bunch using the Plackett-Burman design. Factors involved in the screening process were peptone concentration, urea concentration, ammonium sulfate concentration, calcium nitrate concentration, yeast extract concentration, tween 80 concentration, pH, incubation time, initial moisture content, inoculum size and substrate amount. Through analysis of variance (ANOVA), it was found that initial moisture content (p= 0.001), incubation time (p= 0.001), inoculum size (p= 0.032) and ammonium sulfate concentration (p= 0.023) have been recognized as significant factors affecting endoglucanase activity in solid state fermentation (SSF) of oil palm empty fruit bunch (OPEFB) by T. reesei RUT C-30. The model established from the ANOVA analysis have a significant value of Pmodel>F= 0.0008 and R2 of 0.9132. The preoptimized media showed 2.6 fold increased of endoglucanase activity.Key words: Cellulase, oil palm empty fruit bunches, solid state fermentation, Trichoderma reesei RUT C-30, Plackett-Burman design

The Relationship Between Emotional Intelligence and Mathematical Competency Among Secondary School Students

Anxiety towards mathematics among secondary school students have been reported. Anxiety creates strong negative emotions and can hinder a person's cognitive, learning and academic performance. Fear of mathematics came early in the educational process and if this is not handled properly, it will negatively affect the students to adulthood. In learning mathematics, emotional intelligence (EI) impacts on how a person deals with emotions, mathematics and the general self-regulations strategies that the person adopts. A study was carried out to access secondary students' EI and their mathematical competency (MC). The EI was tested using an EI questionnaire for adolescents (IKEM-R/MEQI) consisting of 7 domains, while the MC was tested using selected questions from PISA (Programme for International Student Assessment) 2012 released items. Analysis shows that EI predict significantly students MC, but with low correlational value. Most of the respondents have moderate level of EI in all 7 domains whereby self awareness and self-regulation are the two domains with lowest scores. On the other hand, most of the students' MC are poor. This particular research shows that EI is not a good predictor of MC which contradicts other reports. However it is suggested that the data collection can be improved by examining students' EI while they are engaging in activities that call for MCs rather than doing it before or after the tasks